Page tree

 

Contents

Item blocks are an element type that can be used to promote multiple items (e.g. products, articles, or blogs) in web campaigns. This article will review dataset prerequisites needed for item blocks then detail the process for adding item blocks to a message.

Dataset Prerequisites

  • Select at least one Item Type (Products, Articles, or Blogs) in SETTINGS > Item Setup
  • Define at least one Item Template 
  • Select Enable Dynamic Campaign Content in SETTINGS > Setup > Advanced Options
  • Confirm your Beacon Version is 10 or later in SETTINGS > Beacon Version

Using Item Blocks

Add an Item Block Element

  1. Log into the Evergage Platform or Visual Editor
  2. Create or edit a campaign and create or edit a message
  3. Item Blocks will work in any type of campaign, so, if needed, you can change the message type to inline or infobar before adding the Item Block
  4. Click    and select Item Block

Select an Item Template

Once you add an Item Block element, you'll configure the way it looks and what information is displayed using Item Templates. You must define at least one item template before continuing. See the article on Item Templates for guidance.

  1. Select 
  2. Select Item Template 
  3. Select the item template you want to use for this Item Block element

Select an Item Layout

Item Layout controls the layout of your items in the Item Block. For example, you can choose to display four items at a time as a 1 x 4 single row, or as a 2 x 2 grid. The maximum layout is 12 items displayed as a 6 x 6 grid.

  1. Still in 
  2. Select Item Layout
  3. Drag your mouse to select the layout
  4. Click to register the selection 

    NOTE

    The item block will automatically increase the message size to accommodate a larger grid, but will not decrease the size if you choose a smaller grid. You can manually adjust the message size by selecting the message and using the container handles to make the message smaller
  5. Number of Items, Min and Max will automatically be adjusted based on the layout, but you can change Min value to be less than or equal to the Max value

Configure Cell Spacing (optional)

Cell spacing is an option which is used to define the distance between Items in the Item Block. 

  1. Still in 
  2. Select Spacing
  3. Enter or select the pixel distance between items, from 5 to 25
  4. Click to register the selection 

Configure Promoted Content

As with any Promote campaign, you must select the Promoted content which is displayed. For example, you could use a Recommendations Recipe to determine which Products appear in your campaign (shown at right). 

  1. Click  next to the message
  2. Select Message Settings
  3. Select Promoted Content
  4. Select the type of promoted content (in the example at the right, Recommendations is selected)
  5. Configure any additional settings. For more information, see the article on Other Message Settings
  6. Click OK 

    NOTE

    Unlike other Promotion messages, if you select Recommendations you cannot set the Minimum and Maximum Recommended Items. These values are based on the selected Item Layout. While you may increase the value for Min items defined in the Item Block settings dropdown, the value for Max items is calculated by multiplying the number of columns in the Item Layout by the number of rows. 

 

 

 

 

  • No labels

This page has no comments.